Model:TTL-GDC
Range:
● Analysis of pesticide residues: vegetables, fruits, grains, plant tissues, etc.
● Environmental analysis: drinking water, groundwater and contaminated water samples
● Phar
The TTL-GDC nitrogen blower concentrator developed by our company provides a single batch of 36-holes sample treatment. The nitrogen blowing concentrator adopts the dry bath aluminum bead heating method, the temperature rises rapidly and stable. The aluminum bead dry bath is suitable for different tube sizes and can handle a variety of different tube sizes at the same time. It avoids the contamination of water vapor heated by the water bath and the lack of replacement of the conductive medium. The dry bath can be rotated at any angle in any direction. The test tube/beaker is always in front of the operator, easy install or remove.
Characters:
1.Suitable for a variety of sample containers such as test tubes, conical flasks, and centrifuge tubes
2.Use nitrogen or air as the evaporation
3.Dry batch under stable temperature, Aluminum beads are used as the heat transfer medium, no need to change the conductive medium
4.The dry bath and the blowing needle rotate at any angle with the spindle as the center of the spindle. The test tube/beaker is always in front of the operator, which is easy to install and remove. When the dry bath and the test tube rotate, the power supply and air supply are uninterrupted. Dry bath heating method to avoid steam pollution and interference with the operator.
5.Aluminum bead heating, avoid to clean dry bath and replace thermal media
6.Independent adjustment of the height of each blowing needle, and Independent control of gas flow each blown needle.
7. Quick-fit snap-on stainless steel blowing needle for easy to take and cleaning, Electric control of the gas distribution system: stroke 100±2 (mm)
8. Internal electric lifting system optimizes product structure, maintains stable operation of sample rack, internal nitrogen pipeline design, No entanglement in the intake line, gas flow meter with needle valve, control and display total gas consumption
8.Dry bath and the design of the control part to extend the life of electrical components
9.Electric control of the gas distribution system
10.Needle valve gas consumption meter controls and displays total gas consumption
11.All parts are laboratory grade, made of stainless steel. Teflon coating for corrosion and high temperature resistance
Technical data
1.Sample Treatment: 36holes
2.Sample rack lifting method: Electric lifting: 100±2mm
3.Tube Size(diameter): 10-29mm;
4.Beaker holder (optional): Beaker Size: 30-55mm 18holes
5.Gas needle(optional): Gas needle length: 110mm
6.Gas consumption: 330ml/min/sample
7.Gas flow rate: 0--15L/min
8.Heating method: Dry batch under stable temperature
9.Heating power: 1000W
10.Temperature range: room temp-130℃
11.Display method: Digital Display
12. Temperature control accuracy: ±1°C
13. Size: 540W×520D×750H
中文
English